Toshiba 3511, 4511 manual Laser unit cooling fan

8

Notes:

1.Do not leave fingerprints or stain on the slit glass.

2.Laser optical unit is a precise apparatus. Handle the unit with extra care not to shock or vibrate it.

3.Do not disassemble the unit in the field since it is very sensitive to the dust and stain.

4.When installing the laser optical unit (installing the harnesses), take off the left rear cover first so that the harnesses will be easily seen and

installed (View from (A)) ( Chapter 2.5.1 [G]).

[B]Laser unit cooling fan

(1) Open the front cover.

(2) Remove the receiving tray ( Chapter 2.5.1 [B]).

(3) Remove 2 screws and take off the inner cover.

(4)Disconnect 1 connector and remove 2 screws. Take off the laser unit cooling fan.

(A)

Fig. 8-605

Inner cover

Fig. 8-606

Laser unit cooling fan

Fig. 8-607

e-STUDIO3511/4511 LASER OPTICAL UNIT 8 - 10 November 2003 © TOSHIBA TEC