Toshiba 3511, 4511 manual Bypass tray slide guide width detection PC board

(A-2) Bypass tray slide guide width detection PC board

(1)Release the harness from 1 harness clamp and disconnect 1 connector.

(2)Remove 2 screws and take off the hinge unit.

(3)Detach the bypass tray from the protrusion at the fulcrum of the frame.

10

(4)Remove 3 screws and release 4 latches. Take off the upper cover of the bypass tray.

(5)Remove 1 screw and the plate spring.

(6)Remove 1 screw (indicated with a white arrow) from the back side, then take off the bracket.

Fig. 10-405

Fulcrum

Bypass tray

Fig. 10-406

Latch	Bypass tray upper cover
	Latch
	Fig. 10-407

Bracket

Plate spring

Fig. 10-408

e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 12 November 2003 © TOSHIBA TEC