Toshiba 3511, 4511 manual Remove the arbor, shaft and spring, Bypass feed sensor

(3) Remove the arbor, shaft and spring.

(A-9) Bypass feed sensor

(1)Remove 3 screws and take the lower plate cover.

10

(2)Disconnect 1 connector. Then release the latches and take off the bypass feed sensor.

[B]Lower drawer feed sensor/Side cover opening/closing switch

(1)Take off the bypass unit ( Chapter 10.4 [A]).

(2)Take off the ADU ( Chapter 17.5 [A]).

(3)Take off the 2nd transfer unit ( Chapter 14.7 [K]).

(4)Remove 5 screws and take off the stay.

Arbor

Shaft

Spring

Bypass separation roller

Fig. 10-421

Lower plate cover

Fig. 10-422

Bypass feed sensor

Fig. 10-423

Stay

Fig. 10-424

e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 16 November 2003 © TOSHIBA TEC