Advanced Features

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu

Description

View TV

Changes Anynet+ mode to TV broadcast mode.

Device List

Shows the Anynet+ device list.

(device_name) MENU

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of

 

the DVD recorder will appear.

(device_name) TOOLS

Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the

 

play menu of the DVD recorder will appear.

 

✎✎Depending on the device, this menu may not be available.

(device_name) Title Menu

Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title

 

menu of the DVD recorder will appear.

 

✎✎Depending on the device, this menu may not be available.

Receiver

Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦¦ Setting Up Anynet+

OO MENUm→ System → Anynet+ (HDMI-CEC) → ENTERE

■■ Anynet+ (HDMI-CEC) (Off / On)

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. ■■ Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎✎ If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a device may not turn off if recording is in progress.

✎✎ May not be enabled depending on the device.

¦¦ Switching between Anynet+ Devices

1.Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTEREbutton to select Device List. ✎✎ If you cannot find a device you want, select Refresh to refresh the list.

2.Select a device and press the ENTEREbutton. You can switch to the selected device.

✎✎ The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu.

xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

English 65