Connections

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.

TA950

DC 14V

 

ANT IN

Cable

TA750

 

Power Input

ANT OUT

 

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input Source is set to TV.

✎✎Before turning on the TV, make sure the antenna cable is connected.

1

Selecting the OSD Language.

2

Setting up the Network

3

Selecting the usage mode

4

Select Country

5

Setting the Clock Mode

6

tuningSelecting search options for auto

7

Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Set up your network connection. Press the ENTERE button to start. If you do not know your network set up information or want to set to it later, select Skip. You can set up the network connection later using the Network menu.

✎✎When network connection settings are complete, Software Upgrade is available. Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software upgrade. If you want to upgrade later, select the Skip.

Press the ▲ or ▼ button to select Home Use, and then press the ENTERE button twice.

yy Select the Home Use mode. Store Demo mode is for retail environments.

Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country.

Press the ▲ or ▼ button to select Auto or Manual, then press the ENTERE twice.

✎✎If you selected Manual, you’ll go to the Date and Time screen. Select Date or Time, and then press ENTERE. Then, use the number buttons or the

▲or ▼ button to set the date or time. Use the ◄ or ► button to move

between entry fields. When done setting the Date and Time, select Next, and then press ENTERE

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning.

✎✎Press the ENTEREbutton at any time to interrupt the memorisation process.

If you want to watch a broadcast programme, select Close. If you want to enjoy the Smart Hub, select the Smart Hub.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0"(except France). If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”(France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

English 14