Toshiba 4511, 3511 manual 2nd transfer roller contact clutch

(5)Open the 2nd transfer unit. Disconnect 2 connectors, then remove 1 screw and the ground wire. Remove 1 harness clamp.

(6) Take off the 2nd transfer unit.

[K] 2nd transfer roller contact clutch

(1)Take off the 2nd transfer unit ( Chapter 14.7 [J]).

(2)Take off the 2nd transfer roller ( Chapter 14.7 [I]).

(3)Remove 4 screws. Remove 1 screw and 2 ground wires, and then take off the transfer guide.

(4)Remove 2 tension springs.

(5)Remove 2 clips.

(6)Take off the bushing-1 and slide the bushing-2.

Harness clamp	Ground wire
	Connector
	Fig. 14-741

2nd transfer unit

Fig. 14-742

Transfer guide

Ground wire

Fig. 14-743

Bushing-2

Bushing-1

Fig. 14-744

14

November 2003 © TOSHIBA TEC 14 - 17 e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT