Toshiba 3511, 4511 manual KD-1011 Paper Feed Pedestal PFP, Heater is installed

2

[B]KD-1011 (Paper Feed Pedestal (PFP))

(1) Turn OFF the power and unplug the power cable.

(2) Remove 7 screws and take off the rear cover of the equipment.

Note: Disconnect the connector of the RADF first when the RADF is installed.

Fig. 2-549

(3) Remove 1 screw and the ground wire, and then
disconnect 2 connectors (3 if the optional damp	Connector of optional
heater is installed).
	damp heater

(4)Remove 2 screws and take off 2 fixing brackets on the rear side.

(5)Take off the lower drawer of the equipment and PFP upper drawer.

Fig. 2-550

Fig. 2-551

Fig. 2-552

e-STUDIO3511/4511 OUTLINE OF THE MACHINE 2 - 38 November 2003 © TOSHIBA TEC