e-STUDIO3511/4511 OUTLINE OF THE MACHINE 2 - 32 November 2003 © TOSHIBA TEC
2
(4) Loosen 3 screws, disconnect 2 connectors and
take off the SYS board lower cover.
(5) Remove 4 screws and take off the hard disk
from the SYS board lower cover.
Fig. 2-527
Fig. 2-528
SYS board
lower
Hard disk
Connector
Fig. 2-526
SYS board
upper cover
(3) Loosen 9 screws and take off the SYS board
upper cover.
[C] System control PC board case
(SYS board case)
(1) Take off the SYS board lower cover
( Chapter 2.5.2 [B]).
(2) Disconnect 5 connectors.
Fig. 2-529
04/05