Toshiba 3511, 4511 manual Charger wire, Wire pad, Remove 1 screw and take off the pad guide

(B-3) Charger wire

* Length: 373 mm, tungsten wire diameter 0.06 mm

(1) Take off the terminal covers of the front and rear sides.

Fig. 11-711

11

(2)Remove the terminal, detach the spring and take off the wire.

Notes: Be careful of the followings when attaching the wire.

1.Securely insert the wire into the V- grooves of the front and rear sides.

2.Do not twist the wire.

3.Do not touch the wire directly with bare hands.

Spring

Wire

Terminal

(B-4) Wire pad

(1) Take off the charger wire ( Chapter 11.7 (B-3)).

Note: When installing, pay attention to the direction of the wire pad.

(2) Release the latch and remove the wire pad.

Fig. 11-712

Latch

Fig. 11-713

(3) Remove 1 screw and take off the pad guide.

Pad guide

Fig. 11-714

e-STUDIO3511/4511 DRUM RELATED SECTION 11 - 12 November 2003 © TOSHIBA TEC