Pride Mobility Quantum 1650 3SPVHD Heavy Duty Drop-in Leg Rests, To adjust the leg rest length

V . C O M F O R T A D J U S T M E N T S

Heavy Duty Drop-in Leg Rests

You can adjust the forward/back position, as well as the length of the heavy duty drop-in leg rests.

To adjust the forward/back position:

1.Remove the adjustment bolt from the side rail. See figure 16.

2.Move the leg rest hanger in or out to the desired position.

3.Align the adjustment holes in the leg rest hanger with those in the side rail.

4.Reinstall the adjustment bolt to secure the leg rest hanger.

To adjust the leg rest length:

1.Remove the adjustment screws from the leg rest extension. See figure 16.

2.Slide the leg rest up or down to the desired length.

3.Align the adjustment holes in the leg rest extension and reinstall the adjustment screws.

Anti-Tip Wheels

LEG REST HANGER

ADJUSTMENT BOLT

LEG REST EXTENSION

ADJUSTMENT SCREWS

Figure 16. Heavy Duty Drop-In Leg Rests

The anti-tip wheels are designed to give your power chair increased stability on rough surfaces. The anti-tip wheels are preset at the factory for smooth surfaces or indoor use only. If you plan on using your power chair on rough surfaces, it may be necessary to adjust the anti-tip wheels to better suit your needs. The anti-tip wheels may need adjustment if the following occurs:

„When coming to a stop, your power chair tips forward excessively.

„The anti-tip wheels constantly rub the ground.

WARNING! Consult your Quantum Rehab Provider before attempting to change the anti-tip wheel height! Changing the anti-tip wheel height affects handling under acceleration!

WARNING! The higher you raise the anti-tip wheels, the more you increase your power chair’s tendency to tilt forward while decelerating. You can compensate for this by having your Quantum Rehab Provider make a small adjustment to the pre-programmed deceleration setting in the controller or by moving the seat assembly farther to the back of your power chair.

PROHIBITED! Do not remove the anti-tip wheels.

NOTE: Each drive tire must be inflated to the psi/bar/kPa air pressure rating indicated on the tire for pneu- matic tires. The user must also be seated in the power chair in order to properly adjust the anti-tip wheels.

Quantum Jazzy 1650 Series www.pridemobility.com 27