JVC KY-F1030U manual White balance adjustment, E22

3. Settings and adjustments for shooting (cont’d)

White balance adjustment

Since the colour of light (light temperature) changes depending on the light source, readjust the white balance (AUTO WHITE) when the light source of the object changes.

In the digital output mode, white balance adjustment should be performed using the special application software [KY-LINK].

Inside window

1. Open the side switch panel, and press the [MENU] but- ton for 2 seconds or longer. The [MENU] screen ap- pears on the monitor screen.

2. Press the [UP] or [DOWN] button to select [2. WHITE BALANCE] (the text will be displayed in purple when selected), then press the [SET] button.

The [WHITE BALANCE] screen will appear.

		UP/AW	［UP］�	3.
［MENU］�	MENU	SET	［SET］�
		DOWN	［DOWN］
	1 2 3 4

Press the [UP] or [DOWN] button to select [COLOR TEMP] (the text will be displayed in purple when se- lected), then press the [SET] button.

The set value will be displayed in purple, indicating that it can be changed.

Select [WHITE BALANCE]

[MENU] screen

Item Set value

4. Press the [UP] or [DOWN] button to select the setting depending on the usage environment.

3200K: when using low temperature lighting such as a halogen lamp, etc.

5600K: when using high temperature lighting under the sunlight, etc.

Pressing the [SET] button will register the setting in the main unit memory. The set value will be displayed in white.

MEMO

Pressing the [MENU] button without pressing the [SET] button will not register the set value and the unit will return to the setting prior to the change.

5. Press the [UP], [DOWN] and [SET] buttons to set [WHITE BAL] in the [WHITE BALANCE] screen to “AUTO”.

6. After pressing the [MENU] button twice to return to the normal screen, place a white object with the same light- ing conditions as the object to record, then zoom in to

WHITE BALANCE screen

display white near the center of the screen (more than 80% area of screen).

E22