JVC KY-F1030U manual Lens screen, E39

PROCESS screen

[ ] indicates the factory setting

	Item	Set Value		Contents
PIXEL COMP.		[OFF]	Selects whether or not white spot compensation should
		ON	be performed.
			OFF	: White spot compensation not performed.
			ON	: White spot compensation performed.
			page E28 [White spot compensation]
	PIXEL		Detects the positions of white spots.
	CHECK		page E28 [White spot compensation]

LENS screen

[ ] indicates the factory setting

	Item	Set Value			Contents
IRIS		[AUTO]	Switched in accordance with the employed lens.
		MANUAL	AUTO:	When auto-iris lens is employed.
			MANUAL: • When manual iris lens is employed.
				• No lens mounted.
				• When auto-iris lens is mounted but used as
				manual iris lens.
			* If the auto-iris lens cable is not connected to the [LENS]
			connector, the setting automatically becomes “MANUAL”.
	IRIS LEVEL	0	Sets the iris level when “MANUAL” is selected for the IRIS
	When	1	MODE.
	“MANUAL” is	•	Increasing the value:		Opens the iris
	selected	[128]	Decreasing the value:		Closes the iris
		•
		255
SERVO SEL		[POSITION]	Sets the lens control method.
		SPEED	Normally, use the “POSITION” setting.
			* If the lens control cable is not connected to the [MD
			CONTROL] connector, “---- ” is displayed.
	FOCUS	0	Selects the focus position.
	When	1	Increasing the value:		Focus far away
	“POSITION”	•	Decreasing the value:		Focus nearby
	is	[128]
	selected	•
		255
	ZOOM When	0	Selects the zoom position.
	“POSITION”	1	Increasing the value:		Toward telephoto
	is selected	•	Decreasing the value:		Toward wide-angle
		[128]
		•
		255

E39