JVC KY-F1030U manual Rear, E10, Lights when power is supplied to the cam- era

1. Introduction (continued)

[Rear]

￿	￿
ANALOG OUT	IEEE1394
LENS
￿	MD	￿
	CONTROL
DC IN	REMOTE
POWER
￿
SEE INSTRUCTION MANUAL

￿ ￿

￿[ANALOG OUTPUT] connector

Analog output connector for video signal. Used when connecting the camera to an SXGA-compliant capture board or the des- ignated scan rate converter integrated with the computer.

Pin configurations of connectors (
page E13)

MEMO

Only output when the AC adapter (AA-

P700) is used as the power supply.

￿[IEEE1394] digital output con- nector

Digital output connector for video signal. Used when connecting to the PC’s IEEE 1394 host adapter.

Pin configurations of connectors (
page E13)

￿[LENS] connector 1

To connect the lens’ camera cable (for iris control, power supply).

Pin configurations of connectors (
page E12)

Mounting the lens (
page E17)

￿[POWER] indicator

Lights when power is supplied to the cam- era.

￿[DC IN] connector (Mini DIN 8-pin, female)

Power (DC 12V) for the camera is supplied through this inlet.

For the power supply, use the AA-P700 AC adapter.

Pin configurations of connectors (
page E12)

Connecting power (
page E18)

￿[REMOTE] terminal (Metal 10-pin, female)

Used to connect external devices such as a trigger switch or flash unit.

Pin configurations of connectors (
page E12)

Connecting through digital output connec- tor (
page E14)

Synchronizing flash and trigger (
page E26)

￿[MD CONTROL] lens connector 2

To connect the lens control cable (for zoom, focusing control).

Pin configurations of connectors (
page E12)

Mounting the lens (
page E17)

MEMO

The motorized lens can only be controlled (zoom, IRIS, focus) from the KY-F1030 when the AC adapter (AA-P700) is used as the power supply.

E10