JVC KY-F1030U manual Before shooting, Connecting through digital output connector, E14

2. Before shooting

Connecting through digital output connector

The KY-F1030 can be remote-controlled from a personal computer, and the shot image can be shown on the computer’s monitor.

<Connection Example> Shooting with the camera when the flash is fired by the timing of an external trigger switch.

	AA-P700
Connect to the power supply		AC ADAPTER AA-P700
( page E18)		POWER
		ON
		OFF	AC

[IEEE1394] AC adapter

Connecting the IEEE 1394

Cable (
page E18)

[DC IN]

[REMOTE]

FOCUS LOCK

Attach lens
( page E17)	Flash

Special application software

KY-LINK

IEEE1394 host adapter

PC

Trigger switch

1.Connect the KY-F1030’s [IEEE1394] connector to the IEEE1394 host adapter on the PC.

2.Connect the flash and trigger switch to the [REMOTE] terminal.

3.Turn on the power of the KY-F1030.

*The power for KY-F1030 can be supplied from the IEEE1394 connector of personal com- puter. However, be sure to use the AC adapter (AA-P700) when using the motorized lens or when using both analog output and digital output in combination.

4.Turn ON the PC, and then start up the special application software KY-LINK.

*For how to operate the application software, see the Help file of the KY-LINK.

CAUTION

●Do not turn the power switch on the AC adapter ON/OFF or unplug the IEEE1394 cable while the application software is running.

●Before using the computer with the KY-F1030, release any settings that automatically set the com- puter in the Stand by or Hibernate mode.

MEMO

If two or more KY-F1030 cameras are connected to one computer, it is not possible to view the camera images simultaneously.

E14