JVC KY-F1030U manual System Setting screen, E40

5. Menu screen settings (continued)

SYSTEM SETTING screen

[ ] indicates the factory setting

	Item	Set Value		Contents
AE DISPLAY		[OFF]	Used to set whether the ALC, EEI and IRIS values are
		ON	displayed on the analog output screen.
			OFF:	No on-screen-display
			ON:	On-screen-display
FRZ DISPLAY		[ON]	Used to set whether the “FREEZE” indicator is shown on
		OFF	the screen at the time of trigger input.
			ON:	Displayed
			OFF:	Not displayed
FRZ CANCEL		[MANUAL]	Sets the method for canceling the FREEZE when the
		AUTO (1s)	monitor screen is in FREEZE condition when connection
		AUTO (3s)	is made through digital output.
		AUTO (5s)	MANUAL	: Cancelled by trigger input.
		OFF	AUTO(1s)	: Cancelled after 1 second.
			AUTO(3s)	: Cancelled after 3 seconds.
			AUTO(5s)	: Cancelled after 5 seconds.
			OFF	: Not cancelled.
			* When set to “AUTO” or “OFF”, the displayed screen can
			be updated by trigger input during the FREEZE condi-
			tion.
TEST PATTERN		[BAR]	Sets the test pattern type output when the function set-
		RAMP	ting switch No.1 <TEST PATTERN> is set to “ON”.
		IMPULSE	BAR	: “BAR” pattern is output.
			RAMP	: “RAMP” pattern is output.
			IMPULSE : “IMPULSE” pattern is output.
	LEVEL	[0.7V]	Sets the level of the color signal bar output from the KY-
	When “BAR”/	0.57V	1030’s [ANALOG OUT] connector.
	“IMPULSE”		0.7V:	0.7V test signal is output
	is selected		0.57V:	0.57V test signal is output
MENU RESET			Resets all the set values of menus to the initial values.
			page E43, Resetting menu settings

E40