JVC KY-F1030U manual Process screen, E37

PROCESS screen

[ ] indicates the factory setting

	Item	Set Value			Contents
DETAIL		[ON]	Used to set whether to emphasize details (contours).
		OFF	ON:	Detail emphasis is performed.
			OFF:	Detail emphasis is not performed.
	LEVEL	–7	When [DETAIL] is set to “ON”, the emphasis level of the
	When “ON” is	–6	detail is adjusted.
	selected	•	Increasing the value:		Sharpens details
		[NORMAL]	Decreasing the value:		Softens details
		•
		7
	NOISE SUP.	[OFF]	Reduces noise in the video signal.
	When “ON” is	LOW	OFF:		Noise reduction is not performed.
	selected	MIDDLE	LOW, MIDDLE, HIGH: Noise reduction is performed.
		HIGH	The reduction rate increases in the order of LOW ➝
			MIDDLE ➝ HIGH.
			MEMO
			Note that when the noise reduction is increased, de-
			tails may get lost in the coarse parts of the image.
GAMMA		[ON]	ON:	The video signal is compensated to make the
		OFF		image viewed on the screen natural.
			OFF:	No compensation and the video signal is out-
				put linearly.
MASTER BLACK		–32	Used to adjust the pedestal level (master black), which is
		–31	the standard of black when the lens is capped. To see
		•	more details in black areas, raising the pedestal level will
		[0]	brighten the entire screen.
		•	Increasing the value:		Raises the pedestal level
		31	Decreasing the value:		Lowers the pedestal level
FLARE		[ON]	Compensation of the black level when flaring effect oc-
		OFF	curs and black areas are tinted with color due to irregular
			reflection of light entering the lens.
	LEVEL (R)	–32	Compensation of the black level of Rch
	When “ON” is	–31	Increasing the value:		Red tint becomes weaker
	selected	[NORMAL]	Decreasing the value: Red tint becomes stronger
		•
		31
	L E V E L ( B )	–32	Compensation of the black level of Bch
	When “ON” is	–31	Increasing the value:		Blue tint becomes weaker
	selected	[NORMAL]	Decreasing the value:		Blue tint becomes stronger
		•
		31

E37