JVC KY-F1030U manual Combining with a presentation system, E16

2. Before shooting (continued)

Combining with a presentation system

The image shot by the KY-F1030 can be passed though a scan rate converter and shown on a D-ILA presenter or SXGA-compliant monitor.

AA-P700

Connect the power supply	AC ADAPTER AA-P700
( page E18)	POWER
	ON
	OFF

AC adapter

[ANALOG OUT]

[DC IN]

FOCUS LOCK

AC

[VIDEO IN]

D-ILA or SXGA-compliant monitor

JVC KM-F700

Mount the lens	[VIDEO INPUT]
	terminal	Scan rate converter
( page E17)

1.Connect the KY-F1030’s [ANALOG OUT] connector to the scan rate converter’s [VIDEO INPUT] terminal.

2.Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power.

3.Turn ON the other devices.

*Also see the instructions for the scan rate converter to be used.

MEMO

•When connected to the PC through the [IEEE1394] connector, or an RS-232C device is connected to the [REMOTE] terminal, the auto white balance function of the scan rate converter will be disabled.

•When the shutter speed becomes slower (slower than 1/7.5s), the image may be seen interrupted.

•The image will not freeze even when the scan rate converter’s [FREEZE] button is pressed.

•The scan rate converter’s [SEND] command is invalid.

E16