JVC KY-F1030U manual Side switch panel section inside, E11

Part names and their functions (continued)

[Side switch panel section (inside)] ￿ [SET] button

￿ ￿ ￿
	UP/AW
MENU	SET
	DOWN
1 2 3 4

While the menu screen is displayed, press this button to select a submenu or confirm a selected item or set value.

Setting procedure(
page E32)

￿[DOWN] button

While the menu screen is displayed, press this button to move down to a selectable item on the menu. While an item is selected,

￿use this button to change the set value. Setting procedure(
page E32)

￿￿ Function setting switch

Used for setting the functions of the KY- F1030.

￿[MENU] button

Press this button to output the menu screen through the [ANALOG OUT] connector ￿. Press again to stop display of the menu.

Setting procedure (
page E32)

￿[UP/AW] auto white balance, UP button

●[AW (auto white)]

Press this button to adjust the white bal-

ance when the light source illuminating the subject changes.

White balance adjustment (
page E22)

●[UP]

While the menu screen is displayed, press this button to move up to a select- able item on the menu. While an item is selected, use this button to change the

set value.

Setting procedure (
page E32)

ON

OFF 1 2 3 4

●Switch 1 <TEST PATTERN> ON: Test signal is output.

OFF: The image being shot by the cam- era is output.

Monitor adjustment (
page E21) SYSTEM SETTING screen (
page E40)

●Switch 2 <MENU LOCK>

ON: Disables the [MENU] button ￿.

OFF: Enables the [MENU] button ￿.

●Switch 3 <SYNC ON GREEN>

ON: Applies the sync signal to the green

(G)channel of the video signal that is output through the ANALOG

OUT connector ￿.

OFF: The sync signal is not applied.

●Switch 4 <RESERVED>

This switch is not used. Leave it at OFF.

E11