JVC KY-F1030U manual Part names and their functions, Front and bottom

Part names and their functions

[Front and bottom]

￿

￿

	￿
￿
	￿
￿
￿
￿ Lens mount	￿ Screw holes for mounting the
Although the lens mount conforms to the	camera (1/4-inch)
type C mount lens.	Used when mounting the camera to a fixer
Mounting the lens ( page E17)	or rotating platform.

￿Camera mounting bracket

Although the mounting bracket is mounted on the bottom of the camera when shipped, the bracket can also be mounted on the top of the camera.

Mounting the camera (
page E19)

￿Locking screws for the camera

mounting bracket (M2.6 ⋅ 6mm, 3 units)

CAUTION

●Always use the attached screws. Using screws that exceed 6mm may result in mal- function of the unit.

●When the bracket is mounted on the top sur- face of the camera, use the provided screws (length: 10 mm).

￿Side switch panel (inside)

Open the door to access a switch panel used when making settings on menus. Side switch panel section (
page E11)

￿[FOCUS] backfocus adjustment screw

This is adjusted to the optimal wide setting when shipped from the factory. Should be readjusted when required by the lens used in combination with the camera.

Focus adjustment (
page E24)

￿[LOCK] backfocus locking screw

Screw to lock the backfocus adjustment mechanism.

Focus adjustment (
page E24)

E9