JVC KY-F1030U manual Connecting through analog output connector, E15, AC adapter

Connecting through analog output connector

The image shot by the KY-F1030 can be shown on the computer’s monitor.

Connect the power supply	AA-P700
		AC ADAPTER AA-P700
( page E18)		POWER	AC
		ON
		OFF

AC adapter

[ANALOG OUT]

[DC IN]

FOCUS LOCK

Microscope

adapter

Video capture board

PC

1.Connect the KY-F1030’s [ANALOG OUT] connector to the PC’s capture board.

2.Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power.

3.Turn ON the PC.

*For instructions on how to operate the video capture board or the employed application software, see the respective instruction manual.

CAUTION

Use a 1/2-inch C-mount microscope adapter compatible with the microscope to be employed.

MEMO

When the shutter speed becomes slower (slower than 1/7.5s), the image may be seen interrupted. Also, the image will not freeze even when the external trigger switch is pressed.

E15