Pride Mobility Jazzy 600 XL owner manual Armrest Width Adjustment, To change the armrest width

Models: Jazzy 600 XL

1 43
Download 43 pages 49.36 Kb
Page 24
Image 24
Armrest Width Adjustment

V . C O M F O R T A D J U S T M E N T S

Armrest Width Adjustment

You can change each armrest’s width independently of the other.

NOTE: Changing the armrest width may increase the overall width of your power chair.

To change the armrest width:

1.Locate the two armrest knobs on each side of the armrest receiver bracket. See figure 16.

2.Loosen the knobs.

3.Slide the armrests in or out to the desired width.

4.Tightentheknobs.

Armrest Angle Adjustment

To change the armrest angle:

1.Liftthearmreststraightupsothatitisperpendiculartothefloor. See figure16.

2.Loosen the jam nuts.

3.Turn the adjusting screw clockwise to lower the front of the armrest, or turn the adjusting screw counterclockwise to raise the front of the armrest.

4.Tightenthejamnutstolocktheadjustingscrewintoplace.

FOOT PLATFORM

RETAINING PIN

QUICK RELEASE

FASTENERS

SECUREMENT

NUT

FOOT

PLATFORM

BRACKET

JAM NUT

SETSCREW

Figure 17. Foot Platform Adjustment

Foot Platform Height Adjustment

The foot platform height is easily adjusted to different heights in 1/2-in. increments.

To raise or lower the foot platform:

1.Remove the quick release fasteners from the foot platform bracket. See figure 17.

2.Loosenthefootplatformsecurementnutone-halfturn.

3.Raise or lower the foot platform to the desired height.

4.Reinstall the quick release fasteners into the foot platform bracketandtighten.

5.Tightenthesecurementnut.

Foot Platform Depth Adjustment

To adjust the foot platform depth:

1. Remove the quick release fasteners from the foot platform

bracket. See figure 17.

NUT

BOLT

UNCLAMPED

LEVER (OPEN)

LEVER (FULLY CLOSED)

CAM

CLAMPED

2.

Move the foot platform in or out to the desired depth.

3.

Reinstall the quick release fasteners into the foot platform

 

bracketandtighten.

Quick Release Fasteners: The foot platform is attached to the power base with two quick release fasteners. See figure

17.Each quick release fastener consists of a bolt, a lever, and a nut. See figure 18. The lever has a cam on the end that allows it to clamp into place. The quick release fastener has

Figure 18. Quick Release Fastener Operation

24

www.pridemobility.com

Jazzy 600 XL

Page 24
Image 24
Pride Mobility Jazzy 600 XL owner manual Armrest Width Adjustment, To change the armrest width, Armrest Angle Adjustment