Pride Mobility Legend 4-Wheel Scooter I X . D I S A S S E M B Ly A N D A S S E M B Ly, Seat

Models: Legend 3-Wheel Scooter

1 44
Download 44 pages 55.8 Kb
Page 32
Image 32
I X . D I S A S S E M B LY A N D A S S E M B LY

I X . D I S A S S E M B LY A N D A S S E M B LY

DISASSEMBLY

You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. See figure 12. Place the scooter in an area where you have sufficient clearance to move the parts around. You need about four or five feet in all directions. You may need assistance to lift some of the scooter components. See IV. “Specifications” for individual component weights.

WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for assistance when necessary while disassembling or assembling your scooter.

 

FRONT SECTION

REAR SHROUD

SEAT

 

BATTERIES

REAR SECTION

BASKET

Figure 12. The Legend Disassembled

No tools are required to disassemble or assemble your scooter.Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move around your scooter. Keep in mind that the disassembled sections of the scooter take up more floor space than the assembled scooter.

1.Place the manual freewheel lever in the drive (down) position.

2.Coil the charger power cord and store it for future use.

3.Push forward on the seat lock lever to unlock the seat; lifttheseatupandoffthescooter.Seefigure13.

4.Gently pull the shroud away from the frame at the bottom and lift it off of the scooter. See figure 14.

5.Disconnect the battery strap.

PULL SHROUD AWAY

FROM FRAME HERE

BEFORE LIFTING

SHROUD UP

Figure 13. Removing The Seat
Figure 14. Rear Shroud Removal

32

www.pridemobility.com

Legend

Page 32
Image 32
Pride Mobility Legend 4-Wheel Scooter I X . D I S A S S E M B Ly A N D A S S E M B Ly, Disassembly, Front Section, Seat