V . Y O U R S C O O T E R
Status LED
The Status LED alerts you to electrical problems that may occur with the scooter. The LED remains constantly lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See X. “Basic Troubleshooting” for troubleshooting flash codes.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed you preset with the speed adjustment dial.
!Place your right hand on the right handgrip and your left hand on the left handgrip.
!Use your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forward.
!Release the lever and allow your scooter to come to a complete stop before pushing the other side of the lever to move in reverse.
!When the throttle control lever is completely released, it automatically returns to the center “stop” position and engages your scooter’s brakes.
Battery Condition Meter
The battery condition meter on the control console assembly indicates the approximate strength of your batteries using a color code. Green indicates fully charged batteries, yellow a draining charge, and red indicates that an immediate recharge is necessary.
Horn Buttons
Press these buttons to activate a warning horn. The key must be inserted and turned clockwise for the horn to be operational. Do not hesitate to use the warning horn when its use could prevent accident or injury.
Light Switch
This switch controls your scooter’s lighting system. Toggle this switch to turn on and turn off the lights.
Turn Signal Buttons
Use these buttons to turn on the left and right turn signal lights.
!Press the appropriate turn signal button once to activate it.
!Your scooter’s turn signals are timed to shut off automatically.
Hazard Lights Switch
This switch activates the
Off-Board Charger Port
The scooter’s
18 | www.pridemobility.com | Maxima |
