I X . D I S A S S E M B LY A N D A S S E M B LY

DISASSEMBLY

You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. See figure 15. No tools are required to disassemble or assemble your scooter, but keep in mind that the disassembled sections of the scooter take up more floor space than the assembled unit. Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move around your scooter-about 5 feet in all directions. Remember that some scooter components are heavy and you may need assistance when lifting them.

SEAT

REAR SECTION

FRONT SECTION

 

REAR SHROUD

BASKET

BATTERIES

 

 

Figure 15. The Maxima Disassembled

WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for assistance when necessary while disassembling or assembling your scooter.

To disassemble:

1.Place the manual freewheel lever in the drive (down) position.

2.Coil the charger power cord and store it in the rear storage compartment.

3.Lift the seat straight up and off the scooter. See figure 16.

4.Gently lift the rear shroud off of the scooter. See figure 17.

5.Disconnect the battery tie-down strap that holds the batteries in place.

6.Unplug both black and white 2-pin battery harnesses. See figure 18.

7.Unplug the front-to-rear harness from its mating plug. See figure 19.

Figure 16. Seat Removal

Figure 17. Rear Shroud Removal

 

 

 

 

 

 

Figure 18. Disconnecting The Battery Harnesses

Figure 19. Disconnecting The Front-To-Rear Harness

Maxima

www.pridemobility.com

31

Page 31
Image 31
Pride Mobility Maxima owner manual Disassembly, To disassemble