V I . O P E R A T I O N

!Pull on the left handgrip to steer your PMV to the left.

!Pull on the right handgrip to steer your PMV to the right.

!Move the tiller to the center position to drive straight ahead.

!To stop, slowly release the throttle control lever.After you release the throttle control lever, gently squeeze the handbrake to come to a complete stop. The electronic brakes will automatically engage when your PMV comes to a stop.

NOTE: Your PMV’s reverse speed is slower than that of the forward speed you preset with the speed adjustment dial.

GETTING OFF OF YOUR PMV

1.Bring your PMV to a complete stop.

2.Remove the key from the key switch.

3.Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your PMV.

4.Make certain that the seat is locked securely in position.

5.Carefully and safely get out of the seat and stand to the side of your PMV.

6.You can leave the seat facing to the side to facilitate boarding your PMV next time.

POWER DOWN TIMER FEATURE

Your PMV is equipped with an energy saving automatic power down timer feature designed to preserve your PMV’s battery life. If you mistakenly leave the key in the key switch and in the “on” position but do not use your PMV for approximately 10 minutes, the PMV’s controller shuts down automatically.Although the controller is shut down, power will still be supplied to the PMV’s lighting system.

If the power down timer feature takes effect, perform the following steps to resume normal operation.

1.Turn the key to the “off” (0) position.

2.Turn the key back to the “on” (1) position.

Mini Crosser

www.pridemobility.com

25

Page 25
Image 25
Pride Mobility Mini Crosser owner manual Getting OFF of Your PMV, Power Down Timer Feature