Basic Operation Instructions | 17 |
HIGH-PIVOT POWER ELEVATING LEG RESTS OPTION
The high-pivot power elevating leg rests utilize a high pivot point to more closely mimic the motion of the knee during leg rest elevation They can be adjusted either as a pair or individually. See figure 10. The high-pivot power elevating leg rests provide 70° of movement, have standard swing-away calf pads that are height adjustable, accept all foot plates, and have a maximum weight capacity of 300 lbs. (136 kg). They are available with all power bases that support upgraded electronics and that are available with Synergy Seating Systems. The high-pivot power elevating leg rests operate through the power chair controller or toggle switch.
NOTE: Operation instructions using the joystick 4-way toggles are dis- cussed below. If you are using a different toggle, the Attendant Control Module, or a different operating device, please refer to the appropriate section of this manual or the operation manual supplied with that device and/or your power chair owner’s manual.
NOTE: For information on operating individual power elevating leg rests, please refer to the appropriate section of this manual that refers to the controller you are using, or contact your Quantum Rehab Specialist.
To operate the combined leg rests:
1.Push the toggle switch to the right to elevate both leg rests.
2.Push the toggle switch to the right, release, then push to the right again to lower both leg rests.
Figure 10. The High-Pivot Power Elevating Leg Rests Option
www.quantumrehab.com | Synergy TRU-Balance Power Recline |
