43

Celebrity X www.pridemobility.com

Model Numbers 3-wheel: SC4001, 4-wheel: SC4401
Maximum Allowable Incline 6° (10.5%)
Maximum Obstacle Climbing Ability 2 in. (5 cm)
Overall Length33-wheel: 46 in. (116.84 cm), 4-wheel: 46.75 in (118.75 cm)
Overall Width324 in. (61 cm)
Total Weight Without Batteries63-wheel: 144.5 lbs. (65.54 kg), 4-wheel: 154.5 lbs. (70.1 kg)
Heaviest Piece When Disassembled Front section:
3-wheel: 56 lbs. (25.40 kg), 4-wheel: 65.5 lbs. (29.71 kg)
Turning Radius33-wheel: 41.5 in. (105.41 cm) 4-wheel: 54 in. (137.16 cm)
Speed (Maximum)1Up to 6 mph (9.66 km/h)
Range Per Charge1,
2
With 40 Ah batteries
3-wheel: 16.6 miles (27 km)
4-wheel: 14 miles (22.5 km)
Ground Clearance 2.25 in. (5.7 cm)
Weight Capacity 350 lbs. (159 kg)
Standard Seating Type Medium back deluxe foldable molded plastic
Weight: 51 lbs. (23 kg)
Material: Vinyl
Dimensions:18 in. (45.72 cm) width
18 in. (45.72 cm) depth
Drive System Rear-wheel drive, sealed transaxle, 24 volt DC motor
Tires Solid
Front: 3.5 in. x 10 in. (8.89 cm x 25.40 cm)
Rear:4 in. x 10 in. (10.16 cm x 25.40 cm )
Battery Requirements4,5 Two 12-volt, deep-cycle
Size: U-1 (40 Ah optional)
Weight: 24.50 lbs. (11 kg) each U-1; or 32.5 lbs. (14.75 kg) each 40 Ah
Battery Charger Off-board
APPENDIX I - SPECIFICATIONS
1Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condi-

tion. This specification can be subject to a variance of (+ or -) 10%.

2

Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from

theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum

weight capacity.

3Due to manufacturing tolerances and continual product improvement, this specification can be subject to a

variance of (+ or - ) 3 %.

4AGM or Gel-Cell type required. See IV. “Batteries and Charging.”
5Battery weight may vary based on battery manufacturer.
6Includes standard seat.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176

series EN12184 standards. All specifications subject to change without notice.