I X . C A R E A N D M A I N T E N A N C E
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If your scooter is equipped with a solid tire insert, either the solid insert or the entire wheel must be replaced depending on the model. Contact your authorized Pride Provider for information regarding replacement wheels for your scooter.
WARNING! Wheels on your scooter should only be serviced/replaced by an authorized Pride Provider or qualified technician.
WARNING! Be sure that the key is removed from the key switch and the scooter is not in freewheel mode before performing this procedure.
AXLE KEY |
DRIVE WHEEL |
NUT |
AXLE SLOT |
DRIVE WHEEL WASHER |
WHEEL CAP |
Figure 25. Solid Tire Wheel Removal
Follow these easy steps for a quick and safe repair for solid tires:
1.Remove the key from the key switch.
2.Elevate the side of the scooter of which you are removing the tire. Place wooden blocks under the frame to elevate the scooter.
3.Remove the drive wheel nut and washer from the axle. See figure 25.
4.Pull the wheel off the axle.
5.Slide the new wheel back onto the axle. Make sure that the axle key is in the axle slot. See figure 25.
WARNING! Failure to ensure that the axle key is properly installed into the axle slot when mounting the wheel can result in electronic brake failure, personal injury, and/or product damage.
6.Reinstall the drive wheel nut and washer onto the axle and tighten.
WARNING! Make sure both the nut and washer are reinstalled and tightened properly.
7. Remove the block from beneath the scooter.
40 | www.pridemobility.com | Celebrity X |
