I I I . Y O U R S C O O T E R
Status LED
The status LED alerts you to electrical problems that may occur with the scooter. The LED remains con- stantly lit while your scooter is on. If your scooter develops an electrical problem, the status LED will flash a code. See VIII. “Basic Troubleshooting” for flash codes.
Horn Buttons
These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational. Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Turn Signal Buttons (Optional)
Use these buttons to turn on the left and right turn signal (amber) lights.
Push the left button to activate the left turn signal light. The turn signal indicator LED located in the battery condition meter will flash.
Push the right button to activate the right turn signal light. The turn signal indicator LED located in the battery condition meter will flash.
The turn signals are timed to shut off automatically.
Lights Switch
This switch controls your scooter’s lighting system.
Toggle the switch forward to turn on the front lower light and rear running lights. Toggle the switch rearward to turn the lights off.
WARNING! Scooter users are required to use their lights when visibility is
Hazard Lights Switch (Optional)
This switch activates the
Toggle the hazard lights switch forward to turn on the flashers.
Toggle the hazard lights switch rearward to turn off the flashers.
Hi-Low Switch (Optional)
This switch toggles the scooter’s speed between HI and LOW.
Toggle the switch forward (HI) and your scooter’s maximum speed is 5.25 mph (8.45 km/h). Toggle the switch rearward (LOW) and your scooter’s maximum speed is 2.625 mph (4.22 km/h).
Power Seat Switch (Optional)
The power seat switch activates the power seat actuator and enables you to raise and lower the seat auto- matically. Refer to VI. “Comfort Adjustments” for more information regarding power seat operation and safety.
20 | www.pridemobility.com | V10 |
