I V . Y O U R S C O O T E R

Horn Button

This button activates a warning horn. The scooter must be powered up for the horn to be operational. Do not hesitate to use the warning horn when doing so may prevent accident or injury.

Hi-Low Switch (Class 3 Only)

!Toggle the switch forward for a maximum speed of 13 km/h (8 mph).

!Toggle the switch rearward for a maximum speed of 6.5 km/h (4 mph).

Status LED

The status LED alerts you to electrical problems that may occur with the scooter. The LED remains constantly lit while your scooter is on. If your scooter develops an electrical problem, the status LED will flash a code. See IX. “Basic Troubleshooting” for flash codes.

Lights Switch

This switch controls your scooter’s lights.

!Toggle the switch forward to turn on your scooter’s rear running lights and front (upper) light.

!Toggle the switch to the middle to turn off the scooter’s lights.

!Toggle the switch rearward to turn on your scooter’s rear running lights, front (upper) and front (lower) lights.

WARNING! Scooter users are required to use their lights when visibility is restricted—day or night. Failure to use the lighting system in periods of poor visibility may result in personal injury.

Speed Adjustment Dial

This dial allows you to preselect and limit your scooter’s top speed. The image of the tortoise represents the slowest speed setting, and the image of the hare represents the fastest speed setting.

Throttle Control Lever

This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed you preset with the speed adjustment dial.

Use either of the following to move forward:

!Use your left thumb to push the left side of the throttle control lever.

!Use your right hand fingers to pull back on the right side of the throttle control lever.

Use either of the following to move rearward:

!Use your right thumb to push the right side of the throttle control lever.

!Use your left hand fingers to pull back on the left side of the throttle control lever.

Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side of the lever. When the throttle control lever is completely released, it automatically returns to the center “stop” position and engages the scooter brakes.

Legend Classic XL-8

www.pridemobility.com

19

Page 19
Image 19
Pride Mobility XL-8 owner manual Horn Button, Hi-Low Switch Class 3 Only, Status LED, Lights Switch, Speed Adjustment Dial