Pride Mobility XL-8 owner manual I I . D I S a S S E M B L Y a N D a S S E M B L Y, Disassembly

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y

DISASSEMBLY

You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. See figure 18. No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move around—about 1.5 meters (five feet) in all directions.You may need assistance to lift some of the scooter components.

WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for assistance when necessary while disassembling or assembling your scooter.

SEAT REAR SECTION

REAR SHROUD

FRONT SECTION

BATTERIES

BASKET

Figure 18. The Legend Classic XL-8 Disassembled

To disassemble your scooter:

1.Place the manual freewheel lever in the drive position.

2.Lift the seat up and off the scooter.

3.Gently pull the shroud up and off of the rear section of the scooter.

4.Disconnect the battery strap.

5.Unplug both T-handle battery harnesses. See figure 19.

6.Unplug the front-to-rear harness. See figure 19.

WARNING! Failure to unplug both T-handle battery harnesses and the front-to-rear harness prior to separating the front and rear sections could result in permanent damage to the scooter.

T-HANDLE BATTERY HARNESSES FRONT-TO-REAR HARNESS

Figure 19. Harness Connections

Legend Classic XL-8 www.pridemobility.com 31