While reviewing the call log, you can record a name to associate
with the displayed telephone number by simply pressing and hold-
ing down the RECORD key. After you hear the “beep” say the
name, then release the RECORD key. The recorded name will be
played back to you. If you want to re-record it, just hold down the
RECORD key again.
If you’ve just entered a telephone number manually, press the MODE
key until the RECORD NAME mode is displayed. Then press and
hold the RECORD key, wait for the “beep”, and say the name.
If you want the displayed number to be announced with a name
that has already been recorded, press the MODE key until SE-
LECT NAME is displayed. Then press either REVIEW key until
you hear the name you want to use. Finally press the RECORD
key momentarily to associate the recorded name you just heard
with the number displayed on the screen.
Note: When recording a name, make sure the caller ID display
shows either the caller’s telephone number or the caller’s
telephone number and name.
Leaving Outgoing Messages for specific callers
You can have your VoiceAnnounce 9900CW answer the phone and
deliver a special message to specific callers. You can use this
feature to tell certain people where you are, or what time you’ll be
home. You can even use this feature to intercept nuisance calls
with a message specifically for them.
Up to two outgoing messages (OGMs) can be recorded. One of the
messages is temporary, and will only be delivered once to each
specific caller. The other message is permanent and will be deliv-
ered to specific callers every time they call.
15
de área 603 que no refleja un número exacto que está en su lista
de números serán anunciados como “Llamadas de New Hampshire”

Grabando Un Nombre Para Una Persona Que Llama

Frecuentemente

Hasta cincuenta nombres pueden ser grabados con su propia voz
y combinados con personas que le llaman frecuentemente. Usted
hasta puede hasta combinar un nombre grabado con múltiples
números o personas que le llaman frecuentemente. Cuando el
teléfono suena desde cualquiera de estos números , el nombre es
anunciado en vez de el número.
Mientras revise el registro de llamadas, usted puede grabar el
nombre y combinarlo con el número en la pantalla con oprimir y
sujetar la tecla de RECORD (GRABAR). Después que oiga el tono
diga el nombre que quiera grabar y suelte la tecla de RECORD
(GRABAR). El nombre grabado será anunciado por la bocina
integrada. Si usted quiere grabarlo de nuevo, oprima y sujete la
tecla de RECORD (GRABAR) de nuevo.
Si usted acaba de registrar un número de teléfono manualmente,
oprima la tecla de MODE (MODO) hasta que aparezca GRABE
NOMBRE en la pantalla. Entonces, oprima y sujete la tecla de
RECORD (GRABAR), espere por el tono y diga el nombre que
desea grabar.
Si usted desea que el número que está en la pantalla sea anunciado
con un nombre que ya haya sido grabado, oprima la tecla de MODE
(MODO) hasta que aparezca ESCOJA NOMBRE en la pantalla.
Entonces oprima cualquiera de las dos teclas de REVIEW
(REVISAR) hasta que oiga el nombre que usted quiere usar.
Finalmente, oprima la tecla de RECORD (GRABAR) brevemente
para combinar el nombre grabado que usted acaba de escuchar
con el número en la pantalla.
15