INSTALLATION
1.After you have removed the toaster from the carton, inspect the unit for signs of damage. If there is damage to the unit:
λNotify carrier within 24 hours after delivery.
λSave carton and packing materials for inspection purposes.
λContact the Prince Castle Customer Sales Department at
λRemove protective coating.
2.Verify that all parts have been received.
3.Locate toaster on a flat surface
4.Plug unit into the proper voltage receptacle.
OVERLAY GLOSSARY
ON/OFF Button:Turns Unit on and off.
SCAN UP/ACTUAL TEMP Button: When pressed in run mode, display will show actual platen temperature. In programming mode, when pressed, will increase set point tempera- ture.
SCAN DOWN Button: In programming mode, when pressed will decrease the set point temperature.
SET BUTTON: In run mode when pressed will display the Set Point Temperature. In program mode, when pressed, will store a new Set Point Temperature.
OPERATION
1.Press On/Off Button, conveyor will begin to turn and the display will read “LO”.
|
| ACT | |
PROG | L O | ||
SET | |||
|
|
|
2.Once the toaster reaches its Set Point temperature the display will read “R D Y” and the ACT LED will be lit.
PROG R D Y | ACT | |
SET | ||
|
NOTE: When the toaster is turned OFF, if the platen is above 450°F, the display will alternately indi- cate “COOL” and “OFF” and the conveyor belt motor will continue to run for up to 45 minutes to protect the belt. When cooled sufficiently, the display will go blank and the conveyor belt motor will turn off.
PROG COOL | ACT | PROG O F F | ACT | |
SET | SET | |||
|
|
2
