QUICK SETUP Submenus
29
Hor Image Shift
Specifies the amount to shift an image left (-) or right (+) for pr ecise
positioning on the label. The actual width of the image is not
affected by this parameter. The allowable range is -1.00 through
+1.00 inches in .01 inch increments, displayed as xx/100.
The factory default value is 0.00 inches.
Orientation
Specifies the image orientation to be used when printing the label.
•Portrait. The factory default. Portrait refers to vertical page
orientation, where the height of a page is greater than its width.
The top edge of the image is parallel to the leading edge of the
media. The following example is viewed from the front of the
printer.
4”
FEED
6”
The top edge of
the image is
parallel to the
leading edge of
the media.
Leading Edge