IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read all instructions before using this heater.

2.This appliance is hot when in use. To avoid burns, do not come in contact with heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (1m.) from the front of the heater.

3.Extreme caution is necessary when any heater is used by or near children or invalids and when- ever the heater is left operating and unattended.

4.Always unplug heater when not in use.

5.Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.

6.Any repairs to this appliance should be carried out by a qualified service person.

7.Under no circumstances should this electric fire- place be modified. Parts having to be removed for servicing must be replaced prior to operat- ing this electric fireplace again.

8.Do not use outdoors.

9.This heater is not intended for use in bathrooms, laundry areas or similar indoor locations. Never use this appliance near a bathtub or other wa- ter container.

10.Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic areas and where it will not be tripped over.

11.To disconnect heater, turn controls to OFF, then remove plug from outlet.

12.Connect to properly grounded outlets only.

13.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock, fire or damage to the heater.

14.To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, such as a bed, where openings may become blocked.

15.This heater gets hot and it contains internal parts that sparks and arcs. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

16.Use this heater only as described in this manual. Other uses not recommended by the manufac- turer may cause fire, electric shock, or injury.

17.Avoid the use of an extension cord because it may overheat and cause a risk of fire. However if you must use an extension cord, the cord shall be No. 1.0 mm2 minimum size and rated not less than 1900 watt. The extension cord must be a three wire cord with grounding type plug and cord connector.

18.This electric fireplace heater should not be used as a drying rack for clothing. Also, do not hang Christmas stockings or decorations on or near it.

19.SAVE THESE INSTRUCTIONS.

2

Page 2 Page 4
Page 3
Image 3
Procom SFE33RE, SFE23RE installation instructions Important Instructions
Page 2 Page 4

SFE33RE, SFE23RE specifications

Procom, a leader in communication technology, has introduced two remarkable models: the SFE23RE and SFE33RE. These systems are designed to enhance efficiency and productivity in various applications, catering to a diverse range of industries.

The Procom SFE23RE is specially engineered for upgraded signal performance, supporting operations in the UHF frequency range. One of its standout features includes excellent linear amplification, providing robust and reliable communication at extended distances. This model employs cutting-edge technology to minimize noise and interference, ensuring that users maintain clear audio communication even in challenging environments.

The SFE33RE, on the other hand, takes performance a step further. With an emphasis on enhancing signal strength, this model supports higher data rates, enabling seamless transmission of large amounts of data. The SFE33RE is equipped with advanced frequency-hopping spread spectrum technology, which optimizes bandwidth usage and enhances overall system security. This feature is especially critical in applications where data integrity and confidentiality are paramount.

Both models showcase Procom’s commitment to user-centric design. They feature intuitive interfaces that facilitate easy operation, allowing users to manage frequencies and settings with minimal training. Additionally, their lightweight and compact designs make them portable and easy to integrate into existing systems, which is beneficial for field operations and mobile applications.

Robust durability is another defining characteristic of both the SFE23RE and SFE33RE. Constructed with high-quality materials, they are engineered to withstand harsh environmental conditions, including extreme temperatures and moisture. This resilience ensures longevity and reliability even in the most demanding situations.

Furthermore, both models support a wide range of accessories, enhancing their functionality and adaptability. Optional external antennas, for instance, can be added to extend the communication range even further, catering to the specific needs of the user.

In conclusion, the Procom SFE23RE and SFE33RE are exemplary models in the realm of communication technology, combining advanced features, innovative technologies, and rugged construction. They are tailored to meet the dynamic needs of various industries, making them indispensable tools for professionals seeking reliable and efficient communication solutions. With Procom’s legacy of excellence, users can trust these models to deliver outstanding performance in both routine and critical communication scenarios.
Top Page Image Contents