Operating Instructions
Before programming your transmitter you must first insert two “AAA” batteries. Make sure the main power on/off switch is “ON” position.
1. The ON/OFF button:
*Note: When Fireplace is first operated, the default setting will be: brightest flame, and full heating To turn on Heater, press the “ON/OFF” button. To turn off heater,press the “ON/OFF” button again.
2. Flame brightness setting:
There are three settings for flame
Heater Front Viewbrightness: “1”,“2”and “3 (OFF)”. Press button to decrease the flame brightness, and button to increase the flame brightness.
3. Heating level setting:
There are three settings for heating level: “HI”, “LOW”, and “OFF”. Press button to decrease the Heating level and button to increase the Heating level.
If set on “HI”, two heating elements will be approximately 90°F; set on “LOW”, the set room temperature will be approximately 70°F.
Remote Control Front | Remote Control Back |
Manual Operation (without handheld remote)
Press “ON/OFF” button to turn on or off the fireplace.
Press “HEAT Adjust” button to control heater.
Press “FLAME ” button to control the Flame brightness.
8