RadioLAN DockLINK manual Setting the MDI/MDI-X Switch

4. Route a standard RJ-45 cable between

the station’s10BaseT Network Interface

Card and the 10BaseT jack on the

DockLINK. Connect the cable to the

DockLINK first, and then connect the other

end of the cable to the port on the

station’s Network Interface Card.

10BaseT Network Interface Card

10BaseTEthernet or Crossover Cable

5. Set the MDI/MDI-X push-button switch to

the correct setting for the RJ-45 Dual-

modular cable.

Push the switch in for use with a

crossover cable.

Push the switch out for use with a

standard Category 5 cable.

1

2

3

Figure 8: Setting the MDI/MDI-X Switch

890-010 12/04/98 Page 12 © 1998 RadioLAN.