Testing the Data Range
To test for best signal quality, locate a temporary wireless station in the location at which you intend to locate the DockLINK. Use the NODE DISCOVERY page at each wireless station on the network to verify signal quality. Also test locations where fixed wireless stations are not normally located, such as conference rooms.
2
3 |
4
Signal Quality
DockLINK Station
As you test each location, note the signal strength measured on the NODE DISCOVERY page (see Figure 4). In the event that you discover a location where signal quality is low, there are three basic options for action:
1.If most or all station locations report a
2.If one or only a few station locations report a
5 
4 
3 
2 
1
Figure 4: Testing Data Range
| Page 8 | © 1998 RadioLAN. |
