ELAN Home Systems ZNet Bridge, DT22 SETUP MENU LCD Settings Front Panel RS232, Ethernet ZNet

DT22 INSTALLATION MANUAL E L A N H O M E S Y S T E M S

DT22 SETUP MENU

ETHERNET SETTINGS

Configuration Type

Show Current

EXIT

1) Press the ENTER button when done.

NOTE: The values shown will be different for your network. Also, these numbers will not be correct until after a reboot if the “Configuration Type” or “Static Parameters” values have been changed.

DT22 SETUP MENU

CURRENT IP

IP 169.254. 19.174

MASK 255.255. 0. 0

GW 255.255. 0. 0

EXIT

ZNet Bridge

The S66A, S128P, and Z630 ELAN multi-room controllers are not VIANet enabled devices. Instead these control- lers use an older communication standard called ZNet. An Elan system containing at least one System SS1 or System SC1 will automatically convert the older ZNet feedback into VIANet feedback. However, in systems without a System SS1 or System SC1, the DT22 can provide this functionality, but must be manually enabled using this procedure.

1)Highlight ZNet using the UP arrow or DOWN arrow buttons.

2)Press the ENTER button.

DT22 SETUP MENU

LCD Settings

Front Panel

RS232

Ethernet

ZNet

1)Highlight Edit using the UP arrow or DOWN arrow buttons.

2)Press the ENTER button.

See next page for example

Page 46 © ELAN Home Systems 2009 • All rights reserved.