E L A N H O M E S Y S T E M S | DT22 INSTALLATION MANUAL |
•LCD Brightness
1)Highlight LCD Settings using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
DT22 SETUP MENU
Unit ID
LCD Settings
Front Panel IR
RS232
Ethernet
LCD Timeout
This is the amount of time that the front panel’s LCD backlight is active after a Front Panel button press.
NOTE: It is possible to set the LCD Timeout value to ‘DISABLED’. This will prevent the LCD backlight from ever turning off. It is recommended to greatly decrease the LCD Brightness if this value is used. Otherwise the lifetime of the LCD backlight will be reduced.
1)Highlight LCD Timeout using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
DT22 | SETUP | MENU |
| LCD Settings |
|
LCD Timeout
LCD Contrast
LCD Brightness
EXIT
1)Highlight Edit using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
1) | Press the UP/DOWN arrows to change the LCD Timeout time. | See next page for example |
2) | Press the ENTER button when done. |
© ELAN Home Systems 2009 • All rights reserved. | Page 35 |