ELAN Home Systems DT22 manual Valid, 100.1MHZ PRESET, Preset

E L A N H O M E S Y S T E M S DT22 INSTALLATION MANUAL

Y	ST	FM1	PRESET
100.1MHZ PRESET
			B01
Override
Details
EXIT

Details are listed for the selected station.

FM1	100.1
Valid		: TRUE
Soft Mute		: off
Pilot		: PRESENT
Blend		: 5%
RSSI		: 32 dBuV
SNR		: 19 dB
F Offset		: -16 kHz

6) To Exit press any button.

System Configuration

If the Unit is On, turn it Off:

1)Press and Hold the TUNER button on the Front Panel to turn the unit Off. or Press the Off button on the Remote.

2)Simultaneously Press and Hold both the LEFT and RIGHT front panel buttons.

Unit ID

The DT22 can provide Two-Way feedback status over VIA!NET to Elan Control Panels without the use of a SC1, SS1 or SC4. The DT22 must be assigned an Unit ID when connected to the VIA!NET so it can be identified. There can only be two DT22s connected to the VIA!NET.

By default the DT22 is shipped configured to Unit ID 1. For installations with only one DT22, this setting should not be changed. However, when adding a second DT22 this setting must be changed to 2 on the second unit

NOTE: The VIA!NET jack on the back of the DT22 must be used.

1)Highlight Unit ID using the UP arrow or DOWN arrow buttons.

2)Press the ENTER button.

See next page for example

© ELAN Home Systems 2009 • All rights reserved. Page 33