DT22 INSTALLATION MANUAL | E L A N H O M E S Y S T E M S |
dd= ST, R1, R2, S1, S2
Function:
Query the desired tuner’s mode.
This response will also be sent as unsolicited feedback.
Response: *DT,R1,MODE,DIRECT<cr> or
*DT,R1,MODE,PRESET<cr> etc.
Digit
Command:
&DT,dd,DIGIT,x<cr>
dd= ST, R1, R2, S1, S2 x = 0 - 9
Function:
Sends a digit to the desired tuner.
Enter
Command:
&DT,dd,ENTER<cr>
dd= ST, R1, R2, S1, S2
Function:
Sends the enter key to the desired tuner.
Cancel
Command:
&DT,dd,CANCEL<cr>
dd= ST, R1, R2, S1, S2
Function:
Used to cancel some actions.
Group
Command:
&DT,dd,GROUP,g<cr>
dd= ST, R1, R2, S1, S2 g = A, B, C, D
Function:
Selects a preset group on the desired tuner.
Changing preset groups will likely cause the current station to change.
Query:
&DT,dd,GROUP,?<cr>
|
|
Page 64 | © ELAN Home Systems 2009 • All rights reserved. |
