DT22 INSTALLATION MANUAL | E L A N H O M E S Y S T E M S |
dd= ST, R1, R2, S1, S2
Function:
Begins saving the current station to a preset.
&DT,R1,PRESET,SAVE<cr> Preset number is specified using the DIGIT and ENTER command. &DT,R1,DIGIT,1<cr>
&DT,R1,DIGIT,0<cr>
&DT,R1,ENTER<cr>
Current station is saved to current group’s preset 10.
If two digits are given, ENTER is not required. &DT,R1,PRESET,SAVE<cr> &DT,R1,DIGIT,1<cr>
&DT,R1,DIGIT,7<cr>
Current station is saved to current group’s preset 17.
Sending ENTER without any digits will save to the first open preset.
&DT,R1,PRESET,SAVE<cr>
&DT,R1,ENTER<cr>
Timeout is 5 seconds. Preset WILL be saved in case of timeout. &DT,R1,PRESET,SAVE<cr>
&DT,R1,DIGIT,3<cr> Wait 5 seconds...
Current station is saved to current group’s Preset 3.
Send CANCEL or any other command to prevent saving of preset. &DT,R1,PRESET,SAVE<cr>
&DT,R1,DIGIT,1<cr>
&DT,R1,CANCEL<cr> No preset is saved.
Command:
&DT,dd,PRESET,SAVE,mm<cr>
dd= ST, R1, R2, S1, S2 mm = 1 - 99
mm = 0 will save to the first available preset.
Function:
Saves the current station to a given preset on currently active group.
Send Group command first to save to a specific group.
Command:
&DT,dd,PRESET,DELETE<cr>
dd= ST, R1, R2, S1, S2
Function:
Begins deleting the current tuned preset. ENTER command is required to delete. If no preset is tuned, nothing is deleted. &DT,R1,PRESET,DELETE<cr> &DT,R1,ENTER<cr>
|
|
Page 66 | © ELAN Home Systems 2009 • All rights reserved. |
