E L A N H O M E S Y S T E M S | DT22 INSTALLATION MANUAL |
dd= ST, R1, R2, S1, S2
Function:
Query the desired tuner’s preset group.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,GROUP,A<cr> or *DT,R1,GROUP,B<cr> or *DT,R1,GROUP,C<cr> or
*DT,R1,GROUP,D<cr>
Preset
Command:
&DT,dd,PRESET,UP<cr>
dd= ST, R1, R2, S1, S2
Function:
Go to next preset on the desired tuner.
Command:
&DT,dd,PRESET,DOWN<cr>
dd= ST, R1, R2, S1, S2
Function:
Go to previous preset on the desired tuner.
dd= ST, R1, R2, S1, S2
Query:
&DT,dd,PRESET,?<cr>
dd= ST, R1, R2, S1, S2
Function:
Query current preset of the desired tuner.
This response will also be sent as unsolicited feedback.
Response: |
|
*DT,R1,PRESET,15<cr> | (Tuned to preset 15 in current group) |
or |
|
*DT,R1,PRESET,0<cr> | (Not tuned to a preset now) |
Command:
&DT,dd,PRESET,mm<cr>
dd= ST, R1, R2, S1, S2 mm = 1 - 99
Function:
Tunes to preset mm.
Command:
&DT,dd,PRESET,SAVE<cr>
© ELAN Home Systems 2009 • All rights reserved. | Page 65 |
