E L A N H O M E S Y S T E M S | DT22 INSTALLATION MANUAL |
1)Highlight Static Parameters using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
DT22 SETUP MENU
ETHERNET SETTINGS
Configuration Type
Static Parameters
Show Current
EXIT
STATIC IP ADDRESS
1)Highlight IP Address using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
DT22 SETUP MENU
STATIC IP SETTINGS
IP Address
Netmask
Gateway
EXIT
1)Highlight Edit using the UP arrow or DOWN arrow buttons.
2)Press the ENTER button.
1)Press the UP/DOWN arrows to change the IP Address digit.
2)Press the LEFT/RIGHT arrows select the next IP Address digit.
3)Press the ENTER button when done.
© ELAN Home Systems 2009 • All rights reserved. | Page 43 |
