DT22 INSTALLATION MANUAL | E L A N H O M E S Y S T E M S |
Troubleshooting
Audio Troubleshooting Procedures
Symptom | Possible Cause/s | What an authorized installer can do | |
No power up. | 1. | No AC power. | 1. a. Check Power switch. |
|
|
| b. Connect Power Cord to AC outlet. |
|
|
| c. Check AC circuit breaker. |
| 2. | Blown fuse. | 2. Replace fuse w/ T2AL type fuse, 2A only. |
No audio. | 1. See No power up | 1. | Press Play, tune station, turn on etc. |
| Symptom. |
|
|
| 2. Source on Receiver not | 2. | Select Source on Receiver. |
| selected. |
|
|
| 3. Source | 3 a. Consult front panel display to determine Zone selection. | |
| selected in |
|
|
| wrong zone. IR |
| b. Connect IR keypad or touch panel to correct zone. |
| zone controller |
|
|
| (keypad etc.) |
|
|
| connected to |
|
|
| wrong zone. |
|
|
| 4. Output’s | 4. | Increase volume. |
| volume |
|
|
| turned all the |
|
|
| way down. |
|
|
| 5. Speakers or | 5. | Test known good speaker/volume control at amplifier. |
| volume controls |
|
|
| miswired |
|
|
| or defective. |
|
|
| 6. Zone audio | 6. | Verify connections. |
| output(s) connected |
|
|
| to wrong amplifier |
|
|
| input(s). |
|
|
|
|
Page 52 | © ELAN Home Systems 2009 • All rights reserved. |