DT22 INSTALLATION MANUAL | E L A N H O M E S Y S T E M S |
2)While in Category mode:
a.Left/Right arrows select the previous/next station within selected category
b.Up/Down arrows select the next/previous Category
c.Enter 3 digit station number to jump directly to that station (i.e.
Preset Mode Operation
Choosing preset mode from the front panel:
1)Press the MODE button, highlight Preset using the Up/Down arrows then press ENTER
2)While in Preset mode:
a.Left/Right arrows select the previous/next station
b.Up/Down arrows select the next/previous Preset
Choosing Preset Mode from the remote control:
1)Press PRESET A, B, C, or D
2)While in Preset mode:
a.Pressing PRESET Up/Down arrows chooses the next/previous preset
b.Entering the 2 digit preset number
c.Left/Right arrows select the previous/next station
d.Up/Down arrows select the previous/next station
Storing a preset (A,B,C,D)
The DT22 allows for up to 396 Sirius presets that are shared across both tuners. These presets are identified as A01 – A99,
1)Using the front panel, press MODE then use Up/Down/Enter to select Preset Group A, B, C, or D. Tune to the Sirius station you wish to store. Press MEMORY, select Save Preset. Use Up/Down/Left/Right/Enter to select first and second digit of preset number. Press ENTER and then choose Save.
2)Using the remote control press PRESET A, B, C, or D. Select Sirius station to be stored. Press MEMORY button. Use the number pad to enter two digits for preset to be stored
Recalling a preset (A,B,C,D)
1)Using the remote control, press PRESET A, B, C, or D. Use the number pad to enter the two digit prese number
Displaying the Sirius Firmware Version and Product ID
1) Press and hold MODE for two seconds. Use Up/Down/Enter to select Module info.
Viewing the DT22/DT11 firmware version
1)Turn the unit off by depressing the TUNER button for 2 seconds. The firmware version will appear at the bottom of the front panel display (ex. Version 1.1.0.6)
|
|
Page 74 | © ELAN Home Systems 2009 • All rights reserved. |
