RCA RTD215 Additional Information Technical Specifications, Amplifier Section, AM Tuner Section

RTD215 EN 6/2/07 3:36 PM Page 34

Additional Information

Technical Specifications:

Amplifier Section:

EN	RMS Output Power: Dolby Digital Mode with
	10% Total Harmonic Distortion
	Rear Channels: 32 Watts each Channel
	(1KHz, 4Ohm)
	Front and Center Channel: 32 Watts each Channel
	(1KHz, 4Ohm)
	Subwoofer Channel: 40 Watts (100Hz, 3Ohm)
	Total RMS Output Power, Dolby Digital mode:
	200W
	FTC Output Power: Dolby Digital Mode with 10%
	Total Harmonic Distortion
	Front Channels (L and R): 20 Watts per Channel
	(1KHz, 4Ohm)
	Rear Channels (L and R): 20 Watts per Channel
	(1KHz, 4Ohm)
	Center Channel: 30 Watts (1KHz, 4Ohm)
	Subwoofer Channel: 35 Watts (100Hz, 3Ohm)
	Total FTC Output Power, Dolby Digital mode:
	145 Watts
	Muting Attenuation: 70 dB
	Frequency Response: 200Hz – 20KHz/3dB,
	1KHz ref.
	Subwoofer Frequency Response: 20Hz – 200Hz/
	-3dB, 100Hz ref.
	Signal to Noise Ratio: 70 dB (Dolby digital mode)

AM Tuner Section:

Frequency Response: 2kHz +/-3dB, 400Hz ref.

Usable Sensitivity: 3000uV/m @ S/N 20dB

Signal to Noise: 38dB

IF Rejection: 35dB

FM Tuner Section:

Frequency Response: 15kHz +/-3dB, 1kHz ref.

Quieting: 24dB

Signal to Noise: 62dB(stereo) / 65dB(mono)

IF Rejection: 70dB

Dimensions (H x W x D mm) :

Unit: 66 x 360 x 334

Front Speakers and Stands: 198 x 102 x 63

Front Speakers without Stands: 109 x 81 x 90

Center Speaker: 102 x 253 x 73

Rear Speakers: 198 x 102 x 63

Subwoofer: 308 x 162 x 265

26