RCA RTD215 user manual The Info Menu Camera angle DVD, Play mode all discs except mp3/WMA/jpeg

RTD215 EN 6/2/07 3:36 PM Page 20

The Info Menu

Camera angle (DVD)

Some discs offer different camera angles for EN specific scenes.

1.To change the camera angle, press the ANGLE button on the remote or press the INFO button twice and select the Camera angle icon with the left/right buttons.

2.Choose the angle with the up/down arrow buttons.

If the disc was recorded using a single camera angle, this function is not available.

Play mode (all discs except mp3/WMA/jpeg)

1.While the disc is playing, press the INFO button twice for CD/VCD and three times for DVD.

2.Select the Play Mode icon using the left/right arrow buttons.

3.Use the up/down arrow buttons to select an option.

•DVD play modes: standard, program, A-B repeat, title repeat, chapter repeat.

Program play mode is only available if a program list has been created (see below).

Repeat mode is only available with discs that display elapsed time and remaining time.

To repeat a sequence between points A and B, choose the A-B repeat option, and then follow the instructions for entering the two points.

•VCD and SVCD play modes: standard, program, disc repeat, track repeat, A-B repeat.

•Audio CD play modes: standard, introscan, random, program, repeat A-B, repeat disc, repeat track.

4.To stop repeat playback, select the Play Mode icon and use the up/down arrow buttons to choose the Standard option.

Note:

•For mp3 play modes, please refer to page 14.

Creating a Program List for Program Play Mode (Audio CDs, DVD and VCD discs)

To use program play mode, you must first create a program list.

1.To create a program list, press the INFO button three times. Highlight the Play Mode option and press the up arrow to select the Program option.

2.Press OK. The Program screen is displayed.

3.The first spot in the list is highlighted. Use the number buttons on the remote to enter a track number. As for DVD discs: T stands for Title while C stands for Chapter. As for VCD discs and Audio CDs: T stands for Track.

4.Use the arrow buttons to move to the next spot in the list. Enter the next track number.

5.Continue entering tracks until you have completed your list.

6.Highlight the Play option at the bottom of the screen and press OK or press PLAY to start playback. The program list will play in the order you programmed it.

To stop program play, press STOP or select Standard from the Play Mode option in the INFO display.

If you want to cancel the list, repeat steps 1 and 2 to select CLEAR and press OK.

12