Troubleshooting and Error Messages
| Problem |
| Description and Solution |
| |
Even when in standby mode, you | • The BGM setting may be on. |
| |||
cannot access the Phonebook or | → Press | then | 7 5 1 0 , and press | . | |
other menus. |
|
|
|
| |
( | is displayed in standby |
|
|
|
|
mode.) |
|
|
|
| |
Noise is frequently heard. | → Set the handset and base unit away from other electrical | ||||
|
| appliances. |
|
| |
→Move closer to the base unit.
Two short beeps are heard | • The radio signal is weak. | |||||
during a conversation. |
| → Move closer to the base unit. | ||||
|
|
|
|
|
| |
The charge indicator flashes red | • The charger is not connected properly. | |||||
rapidly. |
| → Make sure the battery is inserted properly. | ||||
|
|
|
|
|
| → Set the handset in the charger properly. |
|
|
|
|
|
| |
You charged the battery for 7 | • The battery charge contacts may be dirty. | |||||
hours, but the beep tones sound | → Clean the battery charge contacts without damaging them | |||||
every 5 seconds and |
|
|
|
| (needs | and charge once more. |
to be charged) flashes after a few | • It is time to change the battery. | |||||
telephone calls. |
| → Replace with a new one. | ||||
|
| |||||
|
|
|
|
|
| |
The battery indicator does not | → Charge the battery for about 7 hours when the low battery | |||||
display the remaining charge | warning is displayed. | |||||
properly after you replace the |
| |||||
battery. |
|
| ||||
|
|
|
|
|
| |
While operating the unit, the AC | • These are normal conditions. | |||||
adaptor feels warm. While |
|
| ||||
charging the battery, the handset |
| |||||
feels warm. |
|
| ||||
36
